Sensitivity analysis example

From BioUML platform
Revision as of 09:29, 14 March 2022 by Elena Kutumova (Talk | contribs)

Jump to: navigation, search

The method description could be found in the section Sensitivity Analysis. Here we give an example of the method application and using in BioUML.

Reproducing a test case in BioUML

To reproduce a test case below in the BioUML workbench, go to the Analysis tab in the navigation pane and follow to analyses > Methods > Differential algebraic equations.

After double click on Sensitivity Analysis, a new tab with analysis settings opens.

Select a path to the example diagram:

data/Examples/DAE models/Data/Diagrams/Geva_Zatorsky_2006_Model_I

and a path to save results of analysis, for example:

data/Collaboration/Demo/Data/Temp/Sensitivity Analysis Results

After you click the Run button and the calculations are finished, you can see the results presented in two tables, including scaled and unscaled sensitivities.

Ready analysis results can be found here:

data/Examples/DAE models/Data/Sensitivity Analysis Results

Description of the test case

Consider the model of p53 and Mdm2 proteins regulation described by Geva-Zatorsky et al. [1]. The model includes the negative feedback loop in which p53 transcriptionally activates an Mdm2 precursor (pMdm2) representing, for example Mdm2 mRNA, and produces subsequent synthesis of Mdm2. Active Mdm2 increases the degradation rate of p53. The list of the model reactions is done in the table below, where x, y and y0 denote concentrations of p53, Mdm2 and pMdm2 respectively.

The model of p53 and Mdm2 interactions
    
ID Reactions Reaction rates
r1 → p53 βx
r2 -p53 → pMdm2 βy · x
r3 pMdm2 → Mdm2 α0 · y0
r4 p53 -Mdm2 → αxy · x · y
r5 Mdm2 → αy · y

Assume βx = 0.3, βy = 0.4, α0 = αy = 0.1 and αxy = 3.2, and solve the algebraic system:

Sa formula 1.png

As a result we obtain the following steady state of the model:

Sa formula 2.png

Exploring the unscaled sensitivity of this state to perturbations of parameters βx, βy, α0, αxy and αy, we can find the matrix of partial derivatives:

Sa formula 3.png

Substituting the values of the investigated parameters, we get:

Sa formula 4.png

Scaled sensitivities could be found by the following way:

Sa formula 5.png

References

  1. Geva-Zatorsky N., Rosenfeld N., Itzkovitz S., Milo R., Sigal A., Dekel E., Yarnitzky T., Liron Y., Polak P., Lahav G., Alon U. Oscillations and variability in the p53 system. Molecular Systems Biology. 2006. V. 2, № 2006.0033.
Personal tools
Namespaces

Variants
Actions
BioUML platform
Community
Modelling
Analysis & Workflows
Collaborative research
Development
Virtual biology
Wiki
Toolbox